A new roof, priced layer by layer

Roof replacement in New Braunfels, TX

Compare materials, see what belongs under the finished surface, and get a written price tied to your roof—not a guess.

Call (830) 272-7520 Get Exact Pricing

Architectural shingle roof on a New Braunfels home

Watch · 1:14 explainer

Roof Replacement in New Braunfels, TX: Shingles vs. Metal, Tear-Off & Pricing

0:00 / 1:14

Key takeaways

Shingles cost less up front. Standing seam metal costs more and is often planned for a longer life.
A full tear-off lets the roofer find and photograph weak decking.
Airflow at the eaves and ridge matters as much as the roof surface in Texas heat.
Your exact price comes from roof size, slope, layers, decking, and material.

Read the transcript

0:00 Intro. This short guide explains how a roof replacement works in New Braunfels, Texas. You will see the main material choice, what happens under the new roof, and how an exact price is built.

0:14 Shingles vs. metal. Most homes here pick architectural shingles or standing seam metal. Shingles cost less up front and come in many colors. Standing seam metal costs more, hides its fasteners, and is often planned for a longer life in our strong sun.

0:33 Tear-off and layers. A good replacement starts with a full tear-off down to the wood deck. Soft or rotten boards get marked and photographed. Then comes underlayment, a water barrier in the valleys, drip edge, starter, and the new roof field.

0:51 Attic heat and pricing. Texas heat is a whole roof problem. Balanced airflow at the eaves and ridge helps the attic breathe. Your exact price depends on roof size, slope, layers, damaged decking, and the material you choose. Ask for it in writing.

Call (830) 272-7520

Start with what you see

What is happening with your roof?

Choose a symptom for likely causes and a safe next step. This guide does not replace an on-roof inspection.

Likely places to check

Ceiling leak

Common causes include a pipe boot, roof valley, vent, skylight, or damaged shingle above the wet area.

Do this now: Move valuables, catch the water, turn off power near wet fixtures, and photograph the stain.

Material decision

Architectural shingles vs. standing seam metal

These are planning ranges, not a project quote. Product, roof shape, deck repairs, access, and installation details change the final price and performance.

Decision point	Architectural shingles	Standing seam metal
Installed price planning range	Often about $4–$8 per sq. ft. locally; verify current written pricing.	Usually a higher upfront investment; exact panel, metal thickness, trim, and roof shape drive the quote.
Texas sun	Often 15–25 years in Central Texas conditions. Ventilation and product quality matter.	Often lasts longer than shingles when coatings, seams, flashings, and movement details are correct.
Wind	Certain systems offer coverage up to 130 mph with required products and enhanced fastening.	Rating depends on the tested panel, clips, spacing, deck, edges, and installation—not metal alone.
Energy use	Reflective shingle colors may lower roof heat gain. Savings depend on attic and home conditions.	Reflective finishes may reduce solar heat gain. No fixed bill savings should be promised.

What you are paying for

Six layers of a complete replacement

Roof layer 1
Tear off
Remove old roofing to expose the deck instead of hiding weak wood under a new layer.
Roof layer 2
Inspect the decking
Mark soft, split, or water-damaged wood. Photograph added work before replacement.
Roof layer 3
Build the water layer
Cover the field with synthetic underlayment and use self-adhering water barrier in vulnerable valleys as specified for the system.
Roof layer 4
Lock down the edges
Install drip edge and the maker's starter course so wind and rain meet a finished perimeter.
Roof layer 5
Install the roof field
Lay shingles or metal to the product's fastening, overlap, flashing, and expansion rules.
Roof layer 6
Balance ventilation
Match ridge exhaust with enough intake air, then inspect flashing, cleanup, and the finished roof.

Built for this area

New Braunfels heat, hail, wind, and hard rain

Comal County roofs face long sun exposure, fast temperature changes, strong storms, and wind-driven rain. A sound roof replacement plan must manage water at every joint, allow materials to move with heat, and keep attic airflow balanced.

Roof anatomy

Five places where roof systems fail

Ridge and vents

Heat and moisture leave through balanced exhaust. Loose caps and failed vent flashing can admit rain.

Roof field

Shingles or panels shed water. Cracks, punctures, lifted seams, and worn surfaces reduce protection.

Valleys

Two slopes collect water here. Debris, poor laps, and damaged underlayment can create fast leaks.

Walls and chimneys

Step and counterflashing must move water over the roof instead of relying on surface caulk.

Eaves and gutters

Drip edge, starter material, intake airflow, and clear drainage protect the roof perimeter.

Educational roof-system guide. The exact source must be confirmed at the property.

Make the right-sized choice

Repair or replace?

Repair may fit

One limited failure on an otherwise serviceable roof, with matching material available and sound decking below.

Replacement may fit

Widespread wear, repeated leaks, broad storm damage, brittle materials, or repairs that can no longer tie into a sound roof.

The roof age, damage spread, deck condition, material match, and written scope should decide the recommendation—not a sales shortcut.

System choices

Materials and methods

Architectural shingles for broad color choice and lower starting cost
Standing seam metal for hidden fasteners and long-term planning
Ventilation, flashing, and underlayment matched to the chosen roof

Exact pricing

What changes the cost

Measured roof area, slope, height, and access
Tear-off layers and damaged decking
Material, flashing, ventilation, and written warranty scope

Work sequence

What happens next

1Inspect and measure every roof plane
2Review materials and the written scope
3Protect the property and install the system
4Inspect cleanup and final roof details

Homeowner standards

What you should expect from a roofer

Photos tied to the exact problem

A written scope before work starts

Clear material and warranty details

A safe work area and final cleanup

Warranty guide

Two warranties. Two different jobs.

Manufacturer material

Some qualifying roof systems may offer material coverage up to 50 years. The exact term can depend on the product, accessory package, installer certification, registration, exclusions, and transfer rules.

Contractor workmanship

A 10-year workmanship term is an example, not a promise. It covers installation only when the roofer's written agreement says so. Ask who handles a leak and what is excluded.

Texas heat is a whole-roof problem

New Braunfels sun heats the roof surface and attic below. A durable plan combines the roof material with balanced intake and exhaust ventilation, sound decking, attic air sealing, and insulation. Reflective colors can help, but no roof color alone fixes a hot attic.

Surface: choose a product and finish made for strong UV exposure.
Airflow: match ridge exhaust with enough intake at the eaves.
Attic: review insulation and air leaks before promising savings.

What changes the cost of roof replacement in New Braunfels?

Every roof is different. Your exact price comes after the roof is checked.

Factor	Smaller job	Bigger job
Roof size	Small, simple ranch roof	Large home with many sections
Layers to remove	One old layer	Two or more layers
Material	Architectural shingles	Standing-seam metal
Decking	Solid wood	Many sheets to replace
Vents and flashing	Reuse what works	New vents and chimney flashing

Think you found the problem?

Common questions

How long does a roof replacement take?

Many straightforward homes take a few working days. Roof size, steep slopes, weather, material, and hidden deck damage can add time.

Are architectural shingles rated for 130 mph winds?

Some shingle systems carry wind coverage up to 130 mph only when the exact product, starter, accessories, and enhanced fastening method meet the maker's rules. Ask for the product documents in writing.

Does a 50-year material warranty mean the roof will last 50 years?

No. A material warranty covers defined product defects under its written terms. It is different from expected service life and from the roofer's workmanship coverage.

Will the quote include damaged decking?

The written scope should explain the included decking allowance or unit price and how extra damaged wood is photographed, approved, and billed.

Can a new roof make my attic cooler?

Reflective materials, balanced ventilation, air sealing, and insulation can reduce heat gain. Results depend on the whole home, so no single roof product guarantees a set utility savings.

Do I need to leave during tear-off?

Usually not, but tear-off is loud. Plan for pets, children, vehicles, and anyone working from home.

Can metal be installed over shingles?

Sometimes. The roofer must check the existing layers, deck condition, moisture risk, local rules, and whether the new system can sit on a sound, flat base.

What should I compare between roof quotes?

Compare material line, tear-off, decking terms, underlayment, flashing, ventilation, cleanup, permit needs, and both written warranties—not only the total price.

Also serving Gruene, Canyon Lake, San Marcos, Seguin, and Schertz. View full service area

Roof replacement near you

Gruene roofing →Vintage Oaks roofing →River Chase roofing →Avery Park & Voss Farms roofing →Copper Ridge roofing →San Marcos roofing →

Active leak? Read the emergency guide →